Thursday, November 8, 2018

Thursday November 8, 2018 - BrainStorming

Brain Storming

Wednesday, November 7, 2018

Wednesday November 7, 2018 - Bio Med Conference


Mechatronics Engineering Google Site
Special Instructions:

Entry Ticket - BioMed Devices Conference
  • Link: 
  • Instructions & Expectations: Check out this link and do some research on what to do at the Biomed Devices conference.  DON'T MISS SILICON VALLEY'S LEADING EVENT FOR MEDTECH PROFESSIONALS 
  • 50-100 words - Check out this link.  do some research on what there is to learn at the Biomed device conference.
  • if you sign up for the Expo only it's free.  If you go during class, I'll give you extra credit if you write up a report and take a picture while you are there.
  •  
  • How to Submit Assignment: Go to your google classroom and check the current Assignments & Questions.in Professional Development

Mechatronics Engineering Plan For Today:
  • Entry Ticket - Clean up a bit
  • Flex Factor and Evergreen Registration
  • Stuff
  • Clean Up



Flex Factor and Evergreen Registration
C++

Robot Club and Open LAB 
  • LAB - Duration: 60 Min
  • Link: Robot Club Google Sites
  • Instructions & Expectations: Work on your Robot Club Project.  
  • How to Submit Assignment: Your Team will need to submit an update to your Robot Project pages.  Make sure you talk to Mr. Burnham about where to update your Robot Project Status Google docs.  If you don't have a page on the Robot Club Site, then turn in the Google Classroom Robot Club assignment.
  • Dig Deeper: Open Lab:
Help With Halloween Take Down

Clean Up
  • Assignment - Duration: 15 Min
  • Instructions & Expectations: Desk cleanup, put away all projects, find your assigned job
  • How to Submit Assignment: When Complete, check yourself off on Sign Out Sheet - 2 Points

Tuesday, November 6, 2018

Tuesday November 6, 2018 - VOTE, and then some more C++


Mechatronics Engineering Google Site
Special Instructions:

Entry Ticket
  • Link: Lots of Robots
  • Instructions & Expectations: Check out this link and do some research on 3 different robots.  Pick 3 that you find interesting, read what this site has to say, and then google for more information about it.  
  • How to Submit Assignment: Go to your google classroom and check the current Assignments & Questions.
    • List the 3 Robots you picked.  
    • In 20-50 words (for each Robot) tell me why you picked them.
    • For each provide me with additional links that provide more information
    • Pick 1 of your 3 robots and tell me how you would use it to make life better for your community

Mechatronics Engineering Plan For Today:
  • Entry Ticket - Clean up a bit
  • Flex Factor and Evergreen Registration
  • Stuff
  • Clean Up



Flex Factor and Evergreen Registration
C++
Robot Club and Open LAB 
  • LAB - Duration: 60 Min
  • Link: Robot Club Google Sites
  • Instructions & Expectations: Work on your Robot Club Project.  
  • How to Submit Assignment: Your Team will need to submit an update to your Robot Project pages.  Make sure you talk to Mr. Burnham about where to update your Robot Project Status Google docs.  If you don't have a page on the Robot Club Site, then turn in the Google Classroom Robot Club assignment.
  • Dig Deeper: Open Lab:
Help With Halloween Take Down

Clean Up
  • Assignment - Duration: 15 Min
  • Instructions & Expectations: Desk cleanup, put away all projects, find your assigned job
  • How to Submit Assignment: When Complete, check yourself off on Sign Out Sheet - 2 Points



Labels:

Monday, November 5, 2018

Monday November 5, 2018 - FlexFactor and some Code...


Mechatronics Engineering Google Site
Special Instructions:

Entry Ticket
  • Instructions & Expectations: Clean up around your Table.  Pickup any stray stuff under your table.  Use the Wipes to wipe down your table

Mechatronics Engineering Plan For Today:
  • Entry Ticket - Clean up a bit
  • Flex Factor and Evergreen Registration
  • Stuff
  • Clean Up



Flex Factor and Evergreen Registration
  • Lecture/Presentation - Duration: 30 Min
  • Instructions & Expectations: Listen and take notes on the Video by Nick on Career Readiness
Let's Talk a bit more about Flex Factor
  • LAB - Duration: 20 Min
C++
Clean Up
  • Assignment - Duration: 15 Min
  • Instructions & Expectations: Desk cleanup, put away all projects, find your assigned job
  • How to Submit Assignment: When Complete, check yourself off on Sign Out Sheet - 2 Points

Labels:

Friday, November 2, 2018

Friday Nov 2, 2018 - Halloween is over... what are we going to do?


Mechatronics Engineering Google Site
Special Instructions:

No Entry Ticket

Mechatronics Engineering Plan For Today:
  • Fix our Arduino Boards
  • Coding C++
  • Maker Friday & Robot Club
  • Clean Up



Fix Our Arduino Boards
  • Duration: 30-45 Min
  • Instructions & Expectations: Complete your Arduino and Bread Board on your "Arduino" board. You will need to make sure you have the Bread board and nuts and bolts.  Get them from Mr. Burnham.  You will also need to make your power harness.  Follow the Instructions from Mr. Burnham and see the Power Harness Link below.
  • Link: 
Coding
    Robot Club and Open LAB
    • LAB - Duration: 60 Min
    • Link: Robot Club Google Sites
    • Instructions & Expectations: Work on your Robot Club Project.  
    • How to Submit Assignment: Your Team will need to submit an update to your Robot Project pages.  Make sure you talk to Mr. Burnham about where to update your Robot Project Status Google docs.  
    • Dig Deeper: Open Lab:
      Clean Up
      • Assignment - Duration: 15 Min
      • Instructions & Expectations: Desk cleanup, put away all projects, find your assigned job
      • How to Submit Assignment: When Complete, check yourself off on Sign Out Sheet - 2 Points

      Labels:

      Thursday, November 1, 2018

      Thursday November 1, 2018 - Halloween is over... Now what?


      Mechatronics Engineering Google Site
      Special Instructions:

      No Entry Ticket To Day

      Mechatronics Engineering Plan For Today:
      • No Entry Ticket Today 
      • Fix up your Arduino Boards
      • Solder Power Harness... 
      • Stuff
      • Clean Up



      Arduino Board Stuff
      • Duration: 30-45 Min
      • Instructions & Expectations: Complete your Arduino and Bread Board on your "Arduino" board. You will need to make sure you have the Bread board and nuts and bolts.  Get them from Mr. Burnham.  You will also need to make your power harness.  Follow the Instructions from Mr. Burnham and see the Power Harness Link below.
      • Link: 
      Coding
      Stuff

      Clean Up
      • Assignment - Duration: 15 Min
      • Instructions & Expectations: Desk cleanup, put away all projects, find your assigned job
      • How to Submit Assignment: When Complete, check yourself off on Sign Out Sheet - 2 Points

      Labels:

      Monday, October 29, 2018

      Monday October 28, 2018... LEDs, Almost Halloween, & Cleaning up some Stuff


      Mechatronics Engineering Google Site
      Special Instructions:

      Entry Ticket - LEDs - 5 ways to determine polarity

      Mechatronics Engineering Plan For Today:
      • Entry Ticket - LEDs
      • Next Flex Update
      • Stuff
      • Clean Up



      Flex Factor - Starts Next Week
      C++ - Can you still get to this class
      Stuff - Cleaning Up some Halloween and Getting the Loot from my car...
      • Assignment - Duration: the rest of the Minutes
      • Instructions & Expectations: Get List instructions here
      • How to Submit Assignment: Do the following
      • Dig Deeper: Look here to learn more...
      Folks Who need to give me their Student Packets
      PM Class
      Alaniz, Alex
      Altizer, James
      Bose, Donna
      Contreras, Miguel
      Herrera, Ismael
      Le, Andrew
      Nguyen, David
      Perez, Matias
      Raynal, Aedan

      Clean Up
      • Assignment - Duration: 15 Min
      • Instructions & Expectations: Desk cleanup, put away all projects, find your assigned job
      • How to Submit Assignment: When Complete, check yourself off on Sign Out Sheet - 2 Points



      Labels:

      Thursday, October 25, 2018

      Thursday Oct 25, 2018 - FlexFactor Pre- Survey

      In November we are going to start the FlexFactor module... stay tuned for more info Next week...

      But please fill out this survey:

      Flex Factor pre-Survey

      Wednesday, October 24, 2018

      Tuesday, October 23, 2018

      Tuesday, October 23, 2018 - 37 Sensor presentations, deep cleaning, Haunted House tickets, and Halloween


      Mechatronics Engineering Google Site
      Special Instructions:



      Mechatronics Engineering Plan For Today:
      • Entry Ticket 
      • what is the limit of this line can X here
      • Stuff
      • Clean Up



      37 Sensor Presentation
      • Instructions & Expectations: All Teams Are going to present and Report
      Deep Cleaning
      • Instructions & Expectations: We are going to have some Teacher directed cleanup of the class and tools
      Halloween
      • Assignment - Duration: 60 Min
      • Instructions & Expectations: How are you doing, What questions do you have?
      Clean Up
      • Assignment - Duration: 15 Min
      • Instructions & Expectations: Desk cleanup, put away all projects, find your assigned job
      • How to Submit Assignment: When Complete, check yourself off on Sign Out Sheet - 2 Points

      Labels:

      Monday, October 22, 2018

      Monday October 22, 2018 - Taiwan Report, Sensor Presentations, Halloween


      Mechatronics Engineering Google Site
      Special Instructions:

      Entry Ticket - 37 Sensors Presentation and Instructables

      Mechatronics Engineering Plan For Today:
      • Entry Ticket 
      • what is the limit of this line can X here
      • Stuff
      • Clean Up



      Taiwan - Quick Report

      37 Sensor Presentation
      • Instructions & Expectations: All Teams Are going to present and Report
      Halloween
      • Assignment - Duration: 40 Min
      • Instructions & Expectations: How are you doing, What questions do you have?
      Clean Up
      • Assignment - Duration: 15 Min
      • Instructions & Expectations: Desk cleanup, put away all projects, find your assigned job
      • How to Submit Assignment: When Complete, check yourself off on Sign Out Sheet - 2 Points

      Labels:

      Friday, October 19, 2018

      Friday October 19, 2018 - WoHoooo Happy Friday

      Mechatronics Engineering Google Site
      Special Instructions:


      Mechatronics Engineering Plan For Today:
      • Entry Ticket  - HBRC
      • 37 Sensors
      • Halloween Project
      • Clean Up



      37 Sensors Presentation and Instructables ~ 60+ min
      • Instructions & Expectations: Please sit with your partner... can't remember who your partner is? See here, where you told me.  
      • OK, You should be about done with your Instructable Doc... So  please spend 10-15 min and finish.  You will turn in a final version today
      • Now You want to spend about 30 min to take the information in your Instructable document and finish the slides, which you are presenting as a team on Monday...
      • A Good 4-5 slide presentation will have the following information: 
        • Catchy Title Slide , with a "hook" image or statement to catch the attention of the audience
        • Over view slide for the Sensor.  This slide will give a short introduction to the sensor
        • Pin definition slide.  This slide will show all the pins, define them and tell how to hook them up
        • Detailed schematic or wiring diagram showing how to connect the sensor to a breadboard or arduino (maybe even use TinkerCAD to show this)
        • Description of the code (you don;t have to show the whole program, just describe it, 
        • Conclusion, Thankyou and Questions
      • How to Submit Assignment: 
        • Turn in your final Document Instructable / Tutorial. This version should be different than what you turned in on Thursday... With about an 15 more worth of work to polish it... maybe have Rey look at it.... Each of you should submit your own copy of the document.  I have made a google classroom assignment - under the category Presentations "Final - Sensor Instructable - #4" where you will cut and paste your doc into my template.  Even if you are working as a team and you have been sharing a document, make sure you have your own copy, and submit it yourself. Make a copy and make any additional edits and submit.
        • Turn in your 4-5 slide presentation. Each of you should submit your own copy of the Presentation.  I have made a google classroom assignment - under the category Presentations "Final - Sensor Instructable Presentation" where you will cut and paste your doc into my template. 
      Halloween Project / Robot Club and Open LAB (1:30-3:10)- (till cleanup)
      • Assignment,  Instructions & Expectations: This is a Team project, where you will build something to go in the Haunted House.  Check out the project list here on the Robot Club "Maker Fridays" page 
      • Dig Deeper: Look at Instructables on Halloween to lean more...

      • Link: Robot Club Google Sites
      • Instructions & Expectations: Work on your Robot Club Project.  
      • How to Submit Assignment: Your Team will need to submit an update to your Robot Project pages.  Make sure you talk to Mr. Burnham about where to update your Robot Project Status Google docs.  If you don't have a page on the Robot Club Site, then turn in the Google Classroom Robot Club assignment.
      • Dig Deeper: Open Lab:
        Clean Up your Project, then back to your desk for quiet work

        Job Ready Skills - 20+ min 3:10-3:30

        Thursday, October 18, 2018

        Thursday October 18, 2018 - Can we Teach Robots Ethics


        Mechatronics Engineering Google Site
        Special Instructions:

        Entry Ticket - Can we teach robots ethics? (20 Min) (till About 12:50)
        • Read the following article  on .  Can we teach robots ethics?
        • Please read this article and then comment on what you thought. What is the main problem that exist when trying to teach robots morals? How would solve this problem? Please write 100+words (that 3 short paragraphs, with an Intro, main thought or question or answer to the argument and a conclusion) make them thoughtful words

        Mechatronics Engineering Plan For Today:
        • Entry Ticket  - HBRC
        • 37 Sensors
        • Halloween Project
        • Job Ready Skills
        • Clean Up



        37 Sensors Presentation and Instructables ~ 40 min
        • Instructions & Expectations: Please sit with your partner... can't remember who your partner is? See here, where you told me.  You will want to continue to work on your  Google Doc that is modeled after the Best In Class Instructable.   
          • Need an example.  Go to www.instructables.com and look at some examples.  
          • Pay attention to all the section and steps.  pick the headings and sections that are done well and copy the style in your doc.
          • a Good "instructable should have the following: 
            • Catchy Title, Introduction section
            • What you need, tools and components section
            • What the Final project should look or behave section
            • Detailed description of the "sensor", like pins and connection instructions
            • Step 1- Step N, which describe each step
            • Working example and Code
            • Conclusion and What's next (like what should they do now that they have a working sensor
        • How to Submit Assignment: This version should be different than what you turned in on Monday... With about an hour more worth of work... Each of you should submit your own copy of the document.  I have made a google classroom assignment - under the category Presentations "Sensor Instructable - Draft #3" where you will cut and paste your doc into my template.  I know you are not done, and this is still a draft, but Cut and Paste your current “Sensor Instructable” document into this document and submit. Even if you are working as a team and you have been sharing a document, make sure you have your own copy, and submit it yourself. Make a copy and make any additional edits and submit.
        Halloween Project - 30+ min (till cleanup)
          Clean Up your Project, then back to your desk for quiet work

          Entry Ticket - Job Ready Skills - 30+ min 2:45-3:20
          Clean Up
          • Assignment - Duration: 5 Min
          • Instructions & Expectations: Desk cleanup, put away all projects, find your assigned job
          • How to Submit Assignment: When Complete, check yourself off on Sign Out Sheet - 2 Points

          Wednesday, October 17, 2018

          Wednesday October 17, 2018 - ROBOT Club

          Mechatronics Engineering Google Site
          Special Instructions:

          Entry Ticket - Check Out HBRC
          • Home Brew Robotics is going to have a bunch of folks showing off a lot of "Don't Drive off the table" Robits at their Oct 24 meeting.  You should check it out.  I know it's a drive, but it would be fun to do this as a family and drive up and check it out... I'm think of going.
          • This is the Message from the folks running the HBRC.  
            • Don't forget! You are scheduled for a presentation Wednesday evening 10/24 (1 week, 4 days), 7pm. The "HBRC Challenge" is where EVERYONE brings the robot on which they are working. Don't be a spectator... participate! Make something scary/fun for Halloween! You know the routine... get your robot, dust it off, charge it up, fix it, finish it, make it better... This is what we do. Our stock-in-trade is functioning robots. Works-in-progress are good for partial credit.
            • HomeBrew Robotics Club 
            • You should at least sign up for the Mailing list
          Halloween Project - 45+ min ~ 12:45 - 1:45
          Take a 15 min walk to the Hub ~1:50 - 2:10
          • Put Halloween Project Stuff Away before going to the Hub
          • Just 15 min... and every needs to come back or we will not be going back to the Hub for a while... 
          Robot Club and Open LAB (2:15-3:20)
          • LAB - Duration: 60 Min
          • Link: Robot Club Google Sites
          • Instructions & Expectations: Work on your Robot Club Project.  
          • How to Submit Assignment: Your Team will need to submit an update to your Robot Project pages.  Make sure you talk to Mr. Burnham about where to update your Robot Project Status Google docs.  If you don't have a page on the Robot Club Site, then turn in the Google Classroom Robot Club assignment.
          • Dig Deeper: Open Lab:
          Clean Up
          • Assignment - Duration: 10-15 Min
          • Instructions & Expectations: Desk cleanup, put away all projects, find your assigned job
          • How to Submit Assignment: When Complete, check yourself off on Sign Out Sheet - 2 Points

          Tuesday, October 16, 2018

          Tuesday October 16, 2018 - ASVAB Testing

          Mechatronics Engineering Google Site
          Special Instructions:

          ASVAB Testing  
          • Assignment - Duration: 3 Hours
          • Instructions & Expectations: You don't need any thing.  Please just sit down and wait for instructions.   While Testing, you will need to have your Laptops Closed, but if you get done with a section early, you can read interesting technical stuff... Please don't play Videos, and they will be visually distracting to the student next to you.

          Monday, October 15, 2018

          Monday October 15, 2018 - First Day of the Long March... Be Nice To Rey


          Mechatronics Engineering Google Site
          Special Instructions:

          Entry Ticket - Job Ready Skills - 30 min

          Mechatronics Engineering Plan For Today:
          • Entry Ticket  - Job Ready Skills
          • what is the limit of this line can X here
          • Stuff
          • Clean Up



          37 Sensors Presentation and Instructables ~ 40 Min
          • Instructions & Expectations: Please sit with your partner... can't remember who your partner is? See here, where you told me.  Listen and take notes in your Interactive Lab Book. If needed review the posted slide presentation
          • How to Submit Assignment: Each of you should submit your own copy of the document.  I have made a google classroom assignment - under the category Presentations "Sensor Instructable - Draft #2" where you will cut and paste your doc into my template.  I know you are not done, and this is still a draft, but Cut and Paste your current “sensor Instructable” document into this document and submit. Even if you are working as a team and you have been sharing a document, make sure you have your own copy, and submit it yourself. Make a copy and make any additional edits and submit.
          • Dig Deeper: Look here to learn more...
          Halloween Project - 40+ min (till cleanup)
          Clean Up
          • Assignment - Duration: 15 Min
          • Instructions & Expectations: Desk cleanup, put away all projects, find your assigned job
          • How to Submit Assignment: When Complete, check yourself off on Sign Out Sheet - 2 Points

          Labels:

          Friday, October 12, 2018

          Friday Oct 12, 2018 - Are You Ready For Me To Be Gone A Week?


          Mechatronics Engineering Google Site
          Special Instructions:

          Entry Ticket - Are We Ready For Next Week?
          • Assignment - Duration: 15 Min
          • Make you can log in to Job Ready Career Skills at www.jobreadycareerskills.com
          • Late Work.  Lots of you are not turning in work... I will be grading a whole bunch of stuff this week end and next week.  Please make sure you go to the Mechatronics Engineering google classroom and check the Assignments & Questions. If you have items that are "missing" then you better turn them in.  I'll accept late work until I do the final grading of that assignment get full points, but you will get some
          • How to Submit Assignment: Go to our Mechatronics Engineering google classroom and check the current Assignments & Questions.

          Mechatronics Engineering Plan For Today:
          • Entry Ticket 
          • Stuff
          • Clean Up



          Rube Gold Berg Clean Up - Make sure Still have your Arduino
          • Duration: 10 Min
          • Assignment # 1: Do you still have your Arduino, and is it on it's mounting board? Answer the question on the Mechatronics Engineering google classroom  as "I Still have my Arduino" assignment
          • Assignment # 2: Does your team have a Project Logo or Image?  If not Make one. Go to the n the Mechatronics Engineering google classroom  as "Robot Club Project Image" assignment
          Robot Club - Make sure you can see and edit your project page
          • Duration: 15 Min
          • Assignment # 1: Does your team have a Presentation Link on the Robot Club page?  If not get your team together and come talk to me.  Then answer the question on the Mechatronics Engineering google classroom  as "I am part of a team and can Edit my project page" assignment
          • Assignment # 2: Does your team have a Project Logo or Image?  If not Make one. Go to the n the Mechatronics Engineering google classroom  as "Robot Club Project Image" assignment
          Halloween Project - What do you want to do?
          Sensor Lab - Lets Learn About More Sensors
          • LAB - Duration: 40 Min
          • Link: Presentation Link
          • Instructions & Expectations: List instructions here
          • How to Submit Assignment: Do the following
          • Dig Deeper: Look here to learn more...
          Documenting Your Sensor - Instructables

            Clean Up
            • Assignment - Duration: 15 Min
            • Instructions & Expectations: Desk cleanup, put away all projects, find your assigned job
            • How to Submit Assignment: When Complete, check yourself off on Sign Out Sheet - 2 Points

            Labels:

            Monday, October 8, 2018

            Monday October 8, 2018 - What did you like about JaBil, and Yes... Finish Rube Goldberg

            Mechatronics Engineering Google Site
            Special Instructions:

            Entry Ticket - What did you like about JaBil?
            • Assignment - Duration: 10 Min
            • Instructions & Expectations: Think about what you saw at JaBil. Write 100-200 words on answering the following questions.
              • 1) What was the most interesting technology or product you saw at JaBil last Friday?
              • 2) What are the skills you think you need to have to be able to work JaBil?
              • 3) If you could work at a company like JaBil, what type of job would you like?
            • How to Submit Assignment: Go to our Mechatronics Engineering google classroom and check the current Assignments & Questions.  Everyone turns this in. - 10 Points

            Mechatronics Engineering Plan For Today:
            • Entry Ticket - Solve a Problem in the World
            • Rube Gold Berg
            • Clean Up




            Halloween Projects
            Rube Gold Berg - What do you still need help with?

            Clean Up
            • Assignment - Duration: 15 Min
            • Instructions & Expectations: Desk cleanup, put away all projects, find your assigned job
            • How to Submit Assignment: When Complete, check yourself off on Sign Out Sheet - 2 Points

            Labels:

            Tuesday, October 2, 2018

            Tuesday, October 2, 2018 - Sensors and Halloween


            Mechatronics Engineering Google Site
            Special Instructions:

            Entry Ticket - Think Of A Problem That Needs To Be Solved
            • Assignment - Duration: 10 Min
            • Instructions & Expectations: Think about the world around you.  What are the hard problems that need to be solved.  These could be half way around the world, but they could also be right in your own community.  Pair up with your Rube Gold Berg Partner, Brain Storm with them about issues, problems, challenges that you, your family, or community may face.  It could be related to lack of access to technology, if could be related to a health or environmental problem... It could be related to lack of access to education and learning... Or clean water, or Electricity... Really any thing you can think of...  Just make a list of ideas... this is brainstorming, so don't judge the ideas, just free form list them
            • How to Submit Assignment: Go to our Mechatronics Engineering google classroom and check the current Assignments & Questions.You will turn in your list of ideas.  Every one turns this is, so make your own list. - 10 Points

            Mechatronics Engineering Plan For Today:
            • Entry Ticket - Solve a Problem in the World
            • 37 sensor - Instructables
            • Rube Gold Berg
            • Clean Up




            Samsung - Solve For Tomorrow Challenge
            • Lecture/Presentation - Duration: 10 Min
            • Link: Samsung Challenge Winners
            • Instructions & Expectations: Listen and take notes in your Interactive Lab Book. If needed review the posted slide presentation
            Sensor Lab - Lets Learn About More Sensors
            • LAB - Duration: 40 Min
            • Link: Presentation Link
            • Instructions & Expectations: List instructions here
            • How to Submit Assignment: Do the following
            • Dig Deeper: Look here to learn more...
            Documenting Your Sensor - Instructables
            Rube Gold Berg

            Clean Up
            • Assignment - Duration: 15 Min
            • Instructions & Expectations: Desk cleanup, put away all projects, find your assigned job
            • How to Submit Assignment: When Complete, check yourself off on Sign Out Sheet - 2 Points

            Monday, October 1, 2018

            Monday October 1, 2018 - What is Our Order?


            Mechatronics Engineering Google Site
            Special Instructions:

            Entry Ticket - Look at these 37 "Sensors"
            • Assignment - Duration: 5 Min
            • Link: 37 sensors (actually a few are output devices, so not technically "sensors")
            • Instructions & Expectations: Please take a few Minutes to look at this list of sensors... later you are going to be teamed up with a partner and will select one.

            Mechatronics Engineering Plan For Today:
            • Entry Ticket - Sensors
            • what is the limit of this line can X here
            • Stuff
            • Clean Up



            Stand Up, Get ready to be assigned a partner and sensor
            • Lecture/Presentation - Duration: 30+ Min
            • Link: ConponentTemplate (PDF)
            • Instructions & Expectations: Listen and take notes in your Interactive Lab Book. If needed review the posted slide presentation
            • How to Submit Assignment: Go to our Mechatronics Engineering google classroom and check the current Assignments & Questions. - 10 Points
            Rube Gold Berg

            Dylan Ahmari Mario
            IN -  START with Coin Slot
            OUT - SeeSaw Motion…

            David / Adam
            IN -  Sense Sensor to trigger Servo
            OUT - Generates motion that next team can sense
            Alan / Oliver
            IN -  Vibration Sensor? Needs something from the team
            OUT - Golf Ball Out

            Sam / Carlos
            IN -  Need motion from previous team, Trigger
            OUT - Ping Pong Ball Rolls out.

            Jose / James
            IN -  Ultrasonic Distance sees ball get close
            OUT - Ping Pong Out

            Let’s have this ball trigger a foil switch

            Dennisse / Shane
            IN -  Needs a signal from the team before
            OUT - Dominos…

            Let’s have this ball trigger a foil switch

            Donna / Andrew
            IN -  Needs signal to start
            OUT - Ping Pong Out

            Let’s have this ball trigger a foil switch

            Erin / Aedan
            IN -  Needs a signal from the team before
            OUT - Dominos…

            Let’s have this ball trigger a foil switch

            Gerrett / Ishmael
            IN -  Needs a signal from the team before
            OUT - Golf or Ping Pong Out
            Matias / Luis
            IN -  Need Signal (Foil)
            OUT - Marble Out

            Can marble make noise?

            Jordan / Miguel
            IN -  Needs Sound?
            OUT - Dominos...

            Alex / Maxx
            IN -  Needs Motion to Motion Sensor
            OUT - Ping Pong Out

            Nicholas / Jesus
            IN -  Ball Loaded by Bump…. Fan Canon turned on

            OUT - Ball fires out - The END

            Halloween - Moving Stuff

            Clean Up